A winding machine is a device that winds a wire-like object onto a specific workpiece, usually used for copper wire winding. Most electrical products need to be wound with enameled copper wire (referred to as enameled wire) to make an inductance coil, which can be completed by a winding machine. For example: various motors, hollow cup motors, rotors, stators, pin inductances, chip inductances, transformers, solenoid valves, inductances, resistors, ignition coils, RFID, transformers, audio coils, IC card high and low frequency coils , focusing coils, etc.

In the textile industry, cotton yarns, man-made fiber threads, etc. are often used to wind various yarn groups and yarns suitable for textile machines, and can also be processed by winding machines.

To ensure the normal operation of an automatic winding machine, daily inspection and correct operation are indispensable and important steps. First of all, an equipment manual should be established for daily records and reading of the operation and problems of the automatic winding machine.

When starting work, carefully check the workbench, cable guides and main sliding surfaces. If there are obstacles, tools, impurities, etc., they must be cleaned, wiped clean, and oiled. Carefully check whether the equipment moving mechanism has new pulling, grinding, If there is a bump, notify the equipment technician to check whether the analysis is caused by a fault, and make a record. Check that the safety protection, power supply, limit and other devices should be complete and intact. Check that the electrical distribution box should be closed firmly and the electrical grounding is good. Check whether the accessories of the device are in good condition.